Products by Columbus McKinnon Corporation

Cady Lifters Adjustable Forks Pallet Lifter is ideal for handling palletized loads where lift trucks can't go. Counter balanced to hang level when empty and to speed handling. Additional features and benefits include: * Counterweight to balance the lifter structure only, not the load....

Cady Lifters Fixed Forks Pallet Lifter is ideal for handling palletized loads where lift trucks can't go. Counter balanced to hang level when empty and to speed handling. Additional features and benefits include: * Counterweight to balance the lifter structure only, not the load. *...

Cady Lifters Narrow Aisle Coil Hooks offer an inexpensive, virtually no maintenance solution to narrow aisle coil handling. Coils can be automatically hooked and released by a remote crane operator. Additional features and benefits include: * Hooks are suspended from notches on the upper...

C-Hook Coil Lifter's full length arms support the total width of multiple coils. When handling narrower loads, the end of the lower arm will protrude. Additional features and benefits include: * All coils, up to a maximum width, are handled centered under the crane hook bail. This simple...

Cady Lifters Low Headroom Beams with Movable Hooks feature load support hooks that can be easily moved to alternate locations for various length loads. Hooks are held in position with quick release pins. Additional features and benefits include: * Cady beams are designed with internal...

Cady Lifters Telescoping Sheet Lifters for Low Headroom, Low Maintenance Sheet Handling handle sheet bundle, plate, wallboard and plywood. Additional features and benefits include: * The basic structural configuration can be modified to handle unit loads such as palletized coils, crates,...

CM Camlok Clamps; TTR Girder Clamps are: * Capacity: 90 lbs - 6,600 lbs * Designed to lift and transport structural steel beams in horizontal position * Clamp designed with the hook as near as possible to the center of gravity of the beam * Long beams should be lifted using 2...

CM Camlok Clamps; TTG Horizontal Girder Clamp's: * Capacity: 200 lbs - 16,500 lbs * Designed to lift and transport structural steel beams in horizontal position * Fitted with a Camlok spring operated safety lock and is operated by pulling the lock upwards * Long beams should be...

CM Camlok Clamps; CG Girder Turning Clamps: * Capacity: 250 lbs - 13,200 lbs * Can be used on Beams, Fabrications, Channels, RSJ's * Can lift and turn beams up to 90° * Fitted with cam/spring operated safety lock * Long lengths of beam should use two clamps

CM Camlok Clamps; THK Horizontal: * Capacity: 90 lbs - 19,800 lbs * Designed to lift and transport structural steel beams in horizontal position * Fitted with a Camlok spring operated safety lock and is operated by pulling the lock upwards * Long beams should be lifted using 2...

Screwlok Beam Clamp: * Capacity: 2,200 lbs - 22,000 lbs * Designed to fit flanges of most structured beams * Act as a semi-permanent lifting point for use with manual or electric hoists * Load pin incorporated for load load suspension with reduced headroom

CM Carbon Midland Super Strong Shackle * Capacity: 1/2 Ton - 35 Ton * All shackles meet or exceed Federal Specification RRC-271D * Working Load Limit and traceability codes shown as permanent marking on body and pin * Available in painted, galvanized and self-colored finishes...

CM Herc-Alloy 1000 Chain: * Capacity: 2,700 lbs - 35,300 lbs * Meets or exceeds many national and international standards * 25% higher working load limit when compared to Grade 80 * Environmentally friendly gray coating for distinct appearance, ease of identification *...

The life and strength of Herc-Alloy 800 chain slings depend on proper inspection, maintenance and use. For additional information, refer to ASME B30.9 and OSHA 1910.184.

Types of Chain Slings: In describing the type, the following symbols should be used if attachments are other than standard, give detail specifications. First symbol (basic type) S Single chain sling C Single choker chain sling with a standard end link on each end, no hook D Double branch...

Ratchet Type Load Binders: * WLL: 2,600 lbs - 13,000 lbs * Each ratchet component is forged from pure alloy steel * Handle is designed loose using self-locking one-way bolts allowing easy removal of unwanted debris such as mud, snow or ice * Proof tested to 50% of the minimum...

Turnbuckles come in 5 variaties at CM: Eye & Eye - WLL: 500 lbs - 21,400 lbs Jaw & Eye - WLL: 500 lbs - 10,000 lbs Jaw & Jaw - WLL: 500 lbs - 21,400 lbs Hook & Eye - WLL: 400 lbs - 7,500 lbs Hook & Hook - WLL: 400 lbs - 7,500 lbs See site for more details: cmworks.com

Precision manufactured and galvanized to meet FF-C-450 Type 1 Class 1 Federal Specifications on 1.4" and larger. See site for more details: cmworks.com

Hoist Ring Machined: * Pivots 180º and swivels 360º simultaneously * Bale and shoulder pin machined from alloy steel * Patented design provides shoulder pin retention with specialized clip * Easily disassembled for periodic non-destructive inspection * Special available...

The balanced, integrated, proven design of the Lodestar has made it the most popular electric chain hoist in the industry. Lodestar gives you more value for your money. Other features and benefits include: * Capacity: 1/8 Ton - 3 Ton * Quick change voltage board-change from low voltage...